pH MINUS 1.4 Kg for swimming pools and hot tubs

Code: PH- 1-4
Not rated
€7,99 €6,60 excl. VAT
In stock

pH minus – A preparation for reducing the pH of pool water and hot tub water. The preparation pH minus is in the form of yellowish pearls, well soluble in water. The aqueous solution of the pH minus product reacts acidic, and therefore the pH of the water is easily reduced with it.

Detailed information

Product detailed description

The ideal value of pH when using without chlorine and chlorine water disinfection is 7.2-7.6. If the pH leaves this defined area, there is a decrease in effectiveness and an increase in the consumption of disinfectants. At low ph (pH < 7.2), the metal parts of the pool and hot tub corrode and the colors of the plastics and films in the pool and hot tub fade faster. At a high pH (> 7.6), the water becomes cloudy and algae forms. Conjunctiva and skin irritation may also occur.

Properties:

The preparation pH minus is in the form of yellowish pearls, well soluble in water. The aqueous solution of the pH minus product reacts acidic, and therefore the pH of the water is easily reduced with it.

Dosage:

10 g of the pH minus product per 1 m3 of water will reduce the pH value of pool water and hot tub water by 0.1. Dispense a measured dose of the product into a container with water, mix and add to the pool water and hot tub water. Dosing with the circulation switched on.

Safety and First Aid:

Danger! H318 Causes serious eye damage; P102 Keep out of reach of children; P280 Wear protective gloves/protective clothing/safety glasses/face shield; P305+P351+P338

In case of eye contact:

Rinse carefully with water for several minutes. Remove contact lenses, if worn and if they can be removed easily. Continue rinsing; P310 Immediately call a POISON CENTER or doctor; P501 Dispose of contents/container as hazardous waste.

Keep containers tightly closed in a dry place out of the reach of children. Read the instructions before use. Do not eat, drink or smoke when working with the product. Do not mix with other chemicals. The manufacturer is not liable for damages caused by improper use. Use the product only for its intended purpose.

Ingredients:

sodium bisulfate 99.3 g/100 g (ES 231-665-7).

Expiration date:

24 months from the date of manufacture. Production date and batch number: stated on the packaging.

Manufacturer:

SPA Studio s.r.o., Bolívarova 2059/26A, 169 00 Prague 6, Czech Republic
info@spa-studio.cz, www.spa-studio.cz/en, +420 235 314 024

Additional parameters

Category: Spare parts and components for whirlpools
Weight: 1.4 kg

Be the first who will post an article to this item!

Do not fill out this field: