Steam generator - Steam generator for saunas 9kW - OC90B
Code: OC90BProduct detailed description
Oceanic presents a highly intelligent steam generator from the top line OC-B. All models of this top series are equipped with an automatic descaling mode. The high-quality steam generator OC-90B is equipped with an intelligent digital controller to control automated steam generation.
Information
- Model: OC-90B
- Oceanic presents a highly intelligent steam generator from the top line OC-B.
- All models of this top series are equipped with an automatic descaling mode.
- The high-quality OC-B steam generator is equipped with an intelligent digital controller to control automated steam generation.
- The system enables timed settings in the range between 15 and 240 min, or the start of a continuous non-stop operation mode, i.e. without a time limit.
- The temperature setting of the developer works on the display in values between 30 and 60 degrees Celsius and Fahrenheit, or settings for home or public operation are possible.
- The generator is also equipped with a sequential heating system, thanks to this ability the generator can also generate a large amount of steam.
- For advanced settings, it is possible to use the digital control mode signal with LED diagnostics.
- Other features include protection against overheating and boiling of dry water in the evaporation unit.
- A 1.2BAR pressure protection with an overpressure valve is a matter of course.
- The system is equipped with a new energy saving technology – the ECO button.
- This button, located inside the cabin, is available when necessary to effectively, economically and immediately reduce the temperature of the steam in the chamber.
- The highest line of generators OC,,B,, is equipped with an intelligent coil heating system for self-protection and life extension, where the highest coil is heated last if necessary.
- The highest spirals tend to be the most stressed by traffic.
- The system of the OC "B" series is also equipped with an automatic descaling program after each system shutdown and a drain valve.
- These top-of-the-line models offer an automatic cleaning mode that works on the principle of rapid steaming, other practical functions include low-energy operation and a range of outputs from 3kW to 18kW.
- A 24-month warranty is a matter of course.
- This model is approved and compliant with European standards with a CE quality certificate and is suitable for commercial operations.
- The package includes: Steam nozzle, control panel with cable, economic ECO button, pressure relief valve, heat sensor, automatic descaling system.
Oceanic OCA with Steam On Demand for light commercial operation up to 20 hours per week.
This robust steam generator will fill your room with steam in minutes. Manufactured from premium anti-softening Teflon coating elements and are sequentially switched to maintain a constant temperature. The easy-to-use IP65 digital control system can be installed inside a wet room and provides continuous heating to 60°C for up to 4 hours. Real-time diagnostics are clearly displayed. The lighting can also be switched using the keyboard.
Automatic flush and drain cycles that help prevent limescale build-up, reducing maintenance. The steam inlet nozzle contains a device for crushing herbs and essential oils for aromatherapy.
Steam On-Demand feature. On request, the steam button can be placed inside or outside the steam chamber for customers to operate. When the generator is pressed, the steam generator turns off for 30 minutes and then stops until the button is pressed again, saving energy, extending the life of the generator and reducing costs during quieter periods of operation.
All our commercial models have a bright red visible steam inlet nozzle. Safety features include dry protection, thermal overload protection and a pressure relief valve. Follow installation instructions for 24 month warranty.
A guide to building a steam room - PDF
Specifications
- Voltage: 230/400V
- Power: 9 kW
- Phase N~: 1/3
- Stream A: 39/13
- Pressure protection: 1.2 BAR
- Room volume: 4 - 6 m³ - High density rooms (stone/ceramic), 6 - 10 m³ Low density rooms (plastic/laminate)
- Steam output m³/h below 0.1mpa: 20.25
- Water consumption kg/hour: 11.25
- Dimensions (L, W, H): 580x260x500 mm
- Number of elements: 3 x 3 kW
Important
- Read the manual before installing and operating the product.
- This device must be connected to an insulating rod.
- This device must be installed by a competent person.
- Disconnect the power source before handling the electrical contacts.
- Confirm the correct voltage for your 1 or 3 phase steam generator.
Steam bath safety precautions
- The elderly, pregnant women, or those suffering from heart disease, high blood pressure, diabetes, or any other medical condition should seek professional advice before using a steam bath.
- Smoking is not allowed in the steam room.
- Avoid entering a steam room after strenuous exercise.
- Do not use the steam room if you are under the influence of alcohol.
- Leave the steam room immediately if you feel sleepy, nauseous or have other difficulties.
- Make sure the steam room is well ventilated.
- The product is not recommended for use by persons under the age of 16.
- For commercial purposes, the operator should place these safety measures in a visible location.
SPA Components has been fully trained on Oceanic steam generators and we have all spare parts available for servicing. Thanks to this, we provide complete post-warranty service directly at the customer's place throughout the Czech Republic. You can also send the steam generators to our branch or we can organize the transport ourselves.
Additional parameters
Category: | Spare parts and components for whirlpools |
---|---|
Weight: | 16.5 kg |
Model: | Oceanic 9kW – OC90B |
Rozměry: | 580x260x500 mm |
Kód produktu: | OC90B |
Be the first who will post an article to this item!